Gitzo GT2540 G-Lock Ser.2 6x Tripod 4 sec. Overview
When Gitzo launched the Mountaineer tripods in 1994, they were the World’s first carbon fiber tripods. Ever since then they have set the standard for performance and quality. The main feature of the range is the new 6X carbon fiber tube, made of a unique structure of 6 crossed layers that maximises rigidity, vibration absorption and lightweight performance. 6X tube has a high density structure made of top quality ultra-thin carbon fibers (7?m or 0.007 mm). Built-in Anti Leg Rotation is now a feature of the whole carbon fiber range. Mountaineer tripods have been further improved with features and details that increase performance, versatility and quality.
ALR
We have introduced a new Anti Leg Rotation system, which means the tripod can be opened in less than 15 seconds. Simply loosen all the twist locks on each leg at the same time, then pull the leg down and tighten the locks individually.
RAPID COLUMN
The center column locking collar above the tripod shoulder makes it easier to adjust the column quickly. Series 1 and above are built with an anti-rotation grooved center column for improved stability.
REVERSIBLE COLUMN
The rapid column can easily be inverted for an alternative shooting angle or low level macro work.
G-LOCK
G-Lock is the new Gitzo leg locking system. The locking mechanism has been completely redesigned in order to achieve a 20% increase in rigidity, faster operation and stronger, safer locking. G-Lock’s special design also provides a “gravity lock” effect: the higher the load applied vertically to the leg, the stronger the lock.
GROUND LEVEL SET
This new feature allows you to remove the center column to save weight and get the camera closer to the ground. Uses existing components: the upper disc with reversible 1/4 - 3/8 bolt and the column hook assembly: Remove column and fix the disk directly to the upper casting using the column hook. No tools needed.
HOOK
This built-in accessory allows you to hang a stabilizingweight (e.g. a full camera bag or a sand/water bag) from
the bottom of the tripod center column. Useful with long
heavy lenses, on uneven ground or in windy conditions.
LEG ENDS
All tripods and monopods in Series 1 and above are provided with removable rubber feet. This feature allows you to easily change worn out rubber feet or to fit other accessories, such as spiked feet or snow/sand shoes. (4 sections tripods in Series 1 are excluded because the final leg section is too narrow to fit these ends).
When Gitzo launched the Mountaineer tripods in 1994, they were the World’s first carbon fiber tripods. Ever since then they have set the standard for performance and quality. The main feature of the range is the new 6X carbon fiber tube, made of a unique structure of 6 crossed layers that maximises rigidity, vibration absorption and lightweight performance. 6X tube has a high density structure made of top quality ultra-thin carbon fibers (7?m or 0.007 mm). Built-in Anti Leg Rotation is now a feature of the whole carbon fiber range. Mountaineer tripods have been further improved with features and details that increase performance, versatility and quality.
ALR
We have introduced a new Anti Leg Rotation system, which means the tripod can be opened in less than 15 seconds. Simply loosen all the twist locks on each leg at the same time, then pull the leg down and tighten the locks individually.
RAPID COLUMN
The center column locking collar above the tripod shoulder makes it easier to adjust the column quickly. Series 1 and above are built with an anti-rotation grooved center column for improved stability.
REVERSIBLE COLUMN
The rapid column can easily be inverted for an alternative shooting angle or low level macro work.
G-LOCK
G-Lock is the new Gitzo leg locking system. The locking mechanism has been completely redesigned in order to achieve a 20% increase in rigidity, faster operation and stronger, safer locking. G-Lock’s special design also provides a “gravity lock” effect: the higher the load applied vertically to the leg, the stronger the lock.
GROUND LEVEL SET
This new feature allows you to remove the center column to save weight and get the camera closer to the ground. Uses existing components: the upper disc with reversible 1/4 - 3/8 bolt and the column hook assembly: Remove column and fix the disk directly to the upper casting using the column hook. No tools needed.
HOOK
This built-in accessory allows you to hang a stabilizingweight (e.g. a full camera bag or a sand/water bag) from
the bottom of the tripod center column. Useful with long
heavy lenses, on uneven ground or in windy conditions.
LEG ENDS
All tripods and monopods in Series 1 and above are provided with removable rubber feet. This feature allows you to easily change worn out rubber feet or to fit other accessories, such as spiked feet or snow/sand shoes. (4 sections tripods in Series 1 are excluded because the final leg section is too narrow to fit these ends).
closed length:
22.0 in
minimum height:
11.4 in
maximum height:
61.4 in
maximum height (with center column down):
52.4 in
weight:
3.1 lbs
load capacity:
26.5 lbs
material:
carbon fiber 6X
leg sections:
4
leg angles:
24°, 60°
center column:
rapid
series:
2
attachment:
1/4" and 3/8" screws
ALR (Anti Leg Rotation):
yes
22.0 in
minimum height:
11.4 in
maximum height:
61.4 in
maximum height (with center column down):
52.4 in
weight:
3.1 lbs
load capacity:
26.5 lbs
material:
carbon fiber 6X
leg sections:
4
leg angles:
24°, 60°
center column:
rapid
series:
2
attachment:
1/4" and 3/8" screws
ALR (Anti Leg Rotation):
yes





