Green Clean Sensor Cleaning Kit Non-Full Frame Overview
Camera sensors are extremely sensitive and tiny dust particles can cause scratching when mechanically removed with cloths, spatulas or brushes.
MINI VAC removes loose dust and abrasion particles from the sensor and the camera body both contact- and residue-free.
The material used is abrasion-free and non-conductive. The end piece of the plastic component has been designed in a trumpet-shaped form and fitted with a crank for better handling. Any unforeseen contact with the sensor leaves no residue, as no softeners are used.
The material is thermo-plastically formed and produced under Cleanroom requirements. The sterile units are individually packed in order to avoid contamination.
The crank enables an exact positioning of the tube, at the same time leaving the access to the camera shaft free for inspection. Even under static electricity charging even the most resistant particles can be lifted off.
Camera sensors are extremely sensitive and tiny dust particles can cause scratching when mechanically removed with cloths, spatulas or brushes.
MINI VAC removes loose dust and abrasion particles from the sensor and the camera body both contact- and residue-free.
- Safe process due to contact- and residue-free application
- No compression and transportation of dirt particles
- No direct gas contact
- High performance suction action guarantees gentle lifting off of the loose particles, even when confronted with the resistance of the static charging inside the camera
- Economical: In fact the main percentage of contamination is loose and can therefore be removed with the MINI Vacuum
- HI TECH pressurized gas is especially strong, stabile and productive thus resulting in the most economical method of sensor cleaning.
- Effective as the dust is removed from the camera shaft and the objective
The material used is abrasion-free and non-conductive. The end piece of the plastic component has been designed in a trumpet-shaped form and fitted with a crank for better handling. Any unforeseen contact with the sensor leaves no residue, as no softeners are used.
The material is thermo-plastically formed and produced under Cleanroom requirements. The sterile units are individually packed in order to avoid contamination.
The crank enables an exact positioning of the tube, at the same time leaving the access to the camera shaft free for inspection. Even under static electricity charging even the most resistant particles can be lifted off.
Kit contains br Mini Vacuum Attachment 10 oz. Vacuum Power Canister 3 Pick-Ups Protective Tubes Wet & Dry Swabs – 3 packs of 2 Non-Full Frame
