Phottix Indra500 TTL Battery Powered Monolight
Intended for photographers on the road, the Indra500 TTL Battery Powered Studio Light from offers a design driven by portability, flexibility and power. Both power cord-free and sync cord-free, the Indra500 is also hassle-free thanks to the Odin receivers for Nikon and Canon cameras built into every unit. Phottix starts with a flash head with all the qualities of a studio flash such as 500Ws of power, adjustable from 1/128 to full power over an 8-stop range. Recycling time is 0. 1 to 2 seconds with the included Li-ion polymer battery and 0. 1 second with the optional AC adapter. Action-stopping flash durations as short as 1/15,000 (t. 1) sec. are possible at reduced power settings for freezing splashes or peak-moment sports shots.
TTL, Manual and Stroboscopic Modes
1/8,000 Sec. Shutter Speed Possible
Power Variable from 1/128 to Full
Built-in Odin Receivers for Nikon & Canon
Built-in Strato II Receiver
LED Modeling Light, Optional AC Adapter
Bag, Shoulder Strap
Includes 5,000mAh Battery and Charger
400 Full-Power Flashes
The Indra500's battery is the key to taking studio quality light out into the field. Photo sessions can have a fluid quality not possible when tethered to an AC cord; setups change in seconds rather than minutes - assistants can even handhold the lights. This can be done at distances up to 328' thanks to built-in radio receivers for Nikon and Canon cameras and use of the optional Odin 4-channel transmitter. The battery gets 400 full-power flashes on a 5-hour charge and thousands at minimum power.
This would be an impressive flash head if had just stopped there but the Indra500 is also TTL capable with Nikon and Canon cameras, allowing photographers to seamlessly transition in rapidly changing light conditions using their camera's auto-exposure technology. Using the optional transmitter, TTL power can be adjusted remotely +/- 3 EV, while manual mode has an expanded 8-stop range.
The Indra500 TTL ships with a Li-ion polymer battery, charger and reflector. A 110-220 VAC adapter is available for separate purchase.
TTL: Most Monolights function only in manual camera modes, limiting their use in fast-moving environments. The Indra500 TTL opens up new creative possibilities, allowing photographers to shoot in shutter and aperture priority modes while taking advantage of their camera's auto-exposure technology.
High Sync Speeds: Traditional Monolights have sync speeds limited to 1/200-1/250 sec. , making balancing flash and ambient light levels problematic. The Indra's High Speed Sync function allows speeds up to 1/8,000 sec. for a much wider exposure latitude.
Second Curtain Sync: The Second Curtain Sync function fires the flash at the end of the exposure rather than the beginning, allowing use of slow shutter speeds to create a natural looking blur trail behind subjects in progressive motion.
Flash Bracketing: Instead of altering the look of your shot by changing your aperture or shutter speed, let the Indra automatically vary its power to get lighter and darker shots around your prime exposure.
Stroboscopic Mode: This mode allows you to capture sequential action by varying the Hertz rate from 100 Hz and the flash frequency from 100 times per exposure.
Built-in Triggering: Adjust TTL exposure compensation +/- 3 EV or adjust power 1/3 or full stops over an 8-stop range in manual mode from up to 328' away with the optional Odin transmitter. The Indra has built-in Odin receivers for Nikon and Canon cameras. Strato II users can trigger the Indra 500 too, but in manual mode only.
Upgradeable: The Indra500 TTL offers a USB port for future firmware upgrades. As camera technology changes the Indra can change along with it.
Bowens Reflector Mount: The Indra500 comes with an umbrella reflector with a Bowens mount. It is also compatible with the other brand accessories that use this mount.
In the Box:
- Indra 500
- S-Mount Reflector
- Bag, Shoulder Strap
- Battery Pack (5,000mAh), comes with body and cell
- Multi-Voltage Charger (US Plug)
- 3.5m studio light power cable
- User manual (in USB)
- (*light stand not included)