PocketWizard MiniTT1 Transmitter for Nikon DSLR
Built on the new ControlTL platform, the dedicated MiniTT1 Nikon Transmitter is the smallest PocketWizard radio ever. It locks onto the camera’s hot-shoe supporting an on-camera flash with its own hot-shoe while working with remote PocketWizard units. Remotes can be one or more PocketWizard FlexTT5 Transceivers connected to Canon E-TTL II flashes or any PocketWizard Receiver for triggering flash or remote cameras. The MiniT1 is the perfect on-camera PocketWizard solution for any Nikon digital camera.
The smallest PocketWizard radio ever, the MiniTT1™ Transmitter locks onto the camera’s hot-shoe supporting an on-camera flash with its own hot-shoe while working with remote PocketWizard units. Remotes can be one or more PocketWizard FlexTT5™ Transceivers connected to Canon E-TTL II flashes or any PocketWizard Receiver for triggering flash or remote cameras.
The MiniTT1 Transmitter is easy to use; just slide in, turn on, and shoot. The new PocketWizard ControlTL™ System interprets the complex E-TTL II data being sent through the camera’s hot shoe and digitally transmits it in a reliable radio signal. Change the flash compensation dial on the camera, and those commands pass seamlessly through the system to your remote flash. Adjust your shutter speed, aperture or ISO and the system corrects for those changes. A ratio command set on the flash or command unit passes through the MiniTT1 to set the remotes. PocketWizard ControlTL radio communication allows you to shoot farther, faster, around corners, through walls even at high noon in bright daylight. Now you can deploy a wireless flash system wherever you want, without infrared limitations, in seconds. Use the MiniTT1 as a Transmitter with any PocketWizard Receiver including the FlexTT5, PlusII or MultiMAX for standard triggering. When used this way with a digital camera, you can take advantage of the new HyperSync Technology that allows up to 1/500th of a second camera sync with many camera/strobe set-ups. PocketWizard HyperSync allows you to advance the timing of your flash trigger precisely so that faster then X-sync speeds can be achieved. Need more speed? Push your ControlTL system beyond 1/500th and go into FP/High-Speed sync mode automatically. No buttons to press or settings to change other then your shutter speed will give you flash sync all the way to 1/8000th.